Penetrating oil
Penetrating oil is thin on purpose. Low viscosity lets capillary action pull it into the gap between a rusted nut and its threads. Spray, wait at least 15 minutes (overnight for the bad ones), then put the wrench on it.
Hardcore Penetration.Rusted threads, seized studs and corroded fittings taking a full soak. The close-up is the part of the job you usually cannot see.
Jobs it's for
Kroil
The legend. One-millionth of an inch. Nothing is too tight for Kroil.
WD-40 Specialist Penetrant
Deeper penetration. Flexible reach. Gets into the tightest spots.
More Penetrating oil Shots
More filthy hardware where this came from.
Full Gallery














