Straight answers
10 questions people ask before they spray, each answered in the first paragraph and then explained.
What Is Penetrating Oil?
Penetrating oil is a very thin fluid designed to wick into the tiny gaps in rusted or seized threads and joints so a stuck fastener will turn. It is a loosening product first and a lubricant second, so it is not the thing you leave on a part for the long haul.
Is Penetrating Oil the Same as Lubricant?
No. Penetrating oil is thin and made to get into a stuck joint and loosen it. Lubricant is made to stay on a surface and cut friction while the part moves. Use the penetrant to get the part free, then a lubricant to keep it that way.
Is WD-40 a Penetrating Oil?
WD-40 Multi-Use Product is mainly a water displacer and light lubricant that also creeps into small gaps. The company sells a separate WD-40 Specialist Penetrant for stuck, rusted parts, and that is the one to compare with penetrating oils.
Penetrating Oil, Penetrating Fluid, Penetrant: Are They the Same Thing?
For shop purposes, yes. Penetrating oil, penetrating fluid, penetrant, rust penetrant and rust loosener all name the same kind of product: a thin fluid for freeing stuck metal parts. The label names differ by brand, not by job.
How Long Should You Let Penetrating Oil Soak?
Give light rust about 15 minutes. For a properly stuck bolt, plan on one to two hours, and for the worst ones, reapply and leave it overnight. Several short applications usually beat one long one.
Does Penetrating Oil Dissolve Rust?
Mostly no. A penetrating oil works by wicking into the gap and helping break the grip of rust, scale and grime around a thread. It is not a rust remover. Removing rust takes abrasion or a product made for that job.
Is Penetrating Oil Flammable?
Treat it as flammable. Many penetrating oils contain flammable solvents, and aerosol cans often use flammable propellants. Check the warning panel and safety data sheet for your exact can, and keep it away from flames, sparks and hot metal.
Heat or Penetrating Oil First on a Stuck Bolt?
Penetrating oil first, then time, and heat only if the part and its surroundings allow it. If you do use heat, wipe off the oil before it, and never heat near fuel lines, brake lines, plastic, or anything that cannot take it.
Can Penetrating Oil Damage Rubber, Plastic or Brakes?
It can. Keep penetrating oil off brake friction surfaces completely, and treat rubber, plastic and paint as at-risk until the label says otherwise. Aim carefully, mask what you can, and wipe overspray off right away.
Penetrating Oil, Grease, Silicone or Dry Lube: Which Do You Need?
Stuck and rusted: penetrating oil. Heavy load or slow metal-on-metal motion: grease. Light sliding, plastic and rubber contact: silicone. Dust-prone parts like locks and chains in dry grit: a dry lube. Many jobs use two in order.