Brakes: keep it off the friction surfaces
Oil on brake pads, shoes, rotors or drums can ruin braking and is a safety problem. When you spray a caliper bolt or a hub, mask or shield the friction surfaces, wipe overspray at once and clean the rotor face with a brake cleaner made for the purpose. Oil-soaked pads and shoes are usually replaced rather than cleaned.
Rubber and plastic
Solvents and oils in some products can swell, soften or craze certain rubbers and plastics. Compatibility varies by product and by material, so check the can and test an out-of-the-way spot first. For bushings, seals, hoses and plastic housings, use a product the label approves and keep the spray tight to the thread.
Paint, wood and fabric
Overspray stains porous surfaces and can lift some finishes. Use a rag as a shield, spray onto a cloth and dab if the part is near a finish you care about, and wipe splashes immediately.
Habits that help
- Use a straw or a rag to aim the fluid at the thread, not at the whole area.
- Wipe off excess when the part is free.
- Read the can for the materials it names as unsafe, and follow it over anything on this site.