Penetrating oils · lubricants · greases
Deep Penetrations

Search every review, head-to-head, fix-it job and guide.

As an Amazon Associate I earn from qualifying purchases.How our links work

Straight Answer

Penetrating Oil, Grease, Silicone or Dry Lube: Which Do You Need?

Short answer

Stuck and rusted: penetrating oil. Heavy load or slow metal-on-metal motion: grease. Light sliding, plastic and rubber contact: silicone. Dust-prone parts like locks and chains in dry grit: a dry lube. Many jobs use two in order.

By job

  • Seized nut, bolt, fitting or hinge pin: penetrating oil.
  • Bearings, gears, hitch balls, anything with load and metal-on-metal contact: grease.
  • Weatherstripping, drawer slides, sliding plastic parts: silicone spray, if the label allows the material.
  • Locks, zippers, and parts that live in dust: a dry lube that does not leave a sticky film.
  • Outdoor metal exposed to moisture: a protective film product.

Why not just use one for everything

A thin penetrant leaves little behind to carry a load. Grease is too thick to reach into a rusted thread. Silicone does not do the heavy work of grease. Each trades away something the others have, which is why the right can depends on the job.

Where to go next

Our product-type guides cover each family with its method and a full shelf of reviewed cans, and the best-of roundups rank them by job.

Quick follow-up

What do I use after penetrating oil frees a part?

Clean the part, then use a lubricant that suits the job: grease for load, silicone or dry lube for light movement, or a protective coating for outdoor metal.

Read the reviews

Cans That Fit This Question

Put it to work

Related Jobs

Keep going

Go Deeper

More answers

Other Questions

General shop guidance, not a substitute for the product label or safety data sheet. Where this page and the can disagree, follow the can. Links to products on this site may be Amazon affiliate links; see the disclosure.